{"id":2067,"date":"2018-05-31T23:17:50","date_gmt":"2018-05-31T21:17:50","guid":{"rendered":"http:\/\/scheuten.me\/?page_id=2067"},"modified":"2018-05-31T23:59:35","modified_gmt":"2018-05-31T21:59:35","slug":"tr-bom-downloads-en","status":"publish","type":"page","link":"https:\/\/scheuten.me\/?page_id=2067","title":{"rendered":"TR – BOM\/Downloads – EN"},"content":{"rendered":"

Tantillus Reborn<\/h1>\n

Chapter 14 – BOM \/ Downloads<\/h2>\n

BOM<\/h3>\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\nbasic-Kit \/ custom parts<\/b><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
1<\/td>\nhousing<\/td>\nAcryl, 5mm, laser cut<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n
1<\/td>\nsilicone damper<\/td>\nf\u00fcr heated bed<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n
1<\/td>\nsilicone sock<\/td>\nfor hotend<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n
1<\/td>\nPertinax \/ FR2<\/td>\n0,5mm, laser cut<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n
1<\/td>\ntranfer glue<\/td>\n3M 468MP, laser cut<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n
1<\/td>\nprinted parts<\/td>\nmax layerheight 0,2mm, 40% infill, 2-3 perimeter, PLA or better, parts around the hotend at least made of PETG<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n
>2<\/td>\nbottles beer<\/td>\nchoose your favorite brand<\/td>\nsupermarket<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\nelectronics<\/b><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
1<\/td>\nLCD<\/td>\n2004, incl. SD-Slot und Encoder<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\ncontroller<\/td>\nMKS Gen V1.4<\/td>\nAmazon<\/a><\/td>\n<\/tr>\n
1<\/td>\nstepdown<\/td>\nLM2596<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nfan<\/td>\n80x80x25, 12V<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nstepper driver<\/td>\nTMC 2208, incl. cooler, 4 piece-Set<\/td>\nWatterott<\/a><\/td>\n<\/tr>\n
1<\/td>\nheated bed<\/td>\n100x100x2mm, 106W<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
1<\/td>\nthermistor<\/td>\n3950<\/td>\n<\/td>\n<\/tr>\n
1<\/td>\nPSU<\/td>\nLeicke 24V, 150W<\/td>\nAmazon<\/a><\/td>\n<\/tr>\n
3<\/td>\nhall-sensor<\/td>\nA3144, 3 St\u00fcck<\/td>\nebay<\/a><\/td>\n<\/tr>\n
3<\/td>\nmagnet<\/td>\nNeodym, d=4mm, h=1mm<\/td>\nMaqna<\/a><\/td>\n<\/tr>\n
2<\/td>\nradial blower<\/td>\nSunon GB1205PKV1-8AY<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nplug set<\/td>\nJST-XHP<\/td>\nAmazon<\/a><\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\nmechanics<\/b><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
7<\/td>\nmagnet<\/td>\nNeodym, d=6mm, h=6mm<\/td>\nMaqna<\/a><\/td>\n<\/tr>\n
2<\/td>\nmagnet<\/td>\nNeodym, d=3mm, h=6mm<\/td>\nMaqna<\/a><\/td>\n<\/tr>\n
4<\/td>\nbearing<\/td>\n688 ZZ<\/td>\nebay<\/a><\/td>\n<\/tr>\n
8<\/td>\nbearing<\/td>\n608 ZZ<\/td>\nebay<\/a><\/td>\n<\/tr>\n
2<\/td>\nbearing<\/td>\nMR105ZZ<\/td>\nebay<\/a><\/td>\n<\/tr>\n
4<\/td>\nlinear bearing<\/td>\nLM8UU<\/td>\nebay<\/a><\/td>\n<\/tr>\n
6<\/td>\nbearing<\/td>\nF624ZZ<\/td>\nebay<\/a><\/td>\n<\/tr>\n
12<\/td>\nsinter bronce bearing<\/td>\nid=8mm, ad=12mm, l=12mm<\/td>\nebay<\/a><\/td>\n<\/tr>\n
3<\/td>\ndowel pin<\/td>\nDIN 7, not hardened, d=4mm, l=20mm<\/td>\nebay<\/a><\/td>\n<\/tr>\n
2<\/td>\nlinear shaft
\n(XY-axis,\u00a0with bore)<\/td>\n		D=8mm, l=220mm, not hardened, calibrated, \u00a0(1.2210), h9, better h6<\/td>\nebay – Pietrzak
\nM\u00e4dler
\nSmalltec<\/td>\n<\/tr>\n
2<\/td>\nlinear shaft
\n(XY-axis, driven)<\/td>\n		D=8mm, l=200mm, 1.2210 or\u00a01.1213
\nh9, better h6<\/td>\n		\u00a0ebay – Pietrzak
\nM\u00e4dler
\nSmalltec<\/td>\n<\/tr>\n
2<\/td>\nlinear shaft
\n(Z-axis)<\/td>\n		D=8mm, l=200mm, hardened, calibrated, CF53\u00a0(1.1213), \u00a0h6<\/td>\n\u00a0ebay – Pietrzak
\nM\u00e4dler
\nSmalltec<\/td>\n<\/tr>\n
2<\/td>\nlinear shaft
\n(spool roller)<\/td>\n		D=8mm, l=100mm,\u00a01.2210 or\u00a01.1213
\nh9, better h6<\/td>\n		ebay – Pietrzak
\nM\u00e4dler
\nSmalltec<\/td>\n<\/tr>\n
2<\/td>\nlinear shaft
\n(XY-axis)<\/td>\n		D=8mm, l=170mm,\u00a0\u00a01.2210 or\u00a01.1213
\nh9, better h6<\/td>\n		\u00a0ebay – Pietrzak
\nM\u00e4dler
\nSmalltec<\/td>\n<\/tr>\n
2<\/td>\nstepper<\/td>\n1,8\u00b0, 1,7A, max.40mm length<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nstepper<\/td>\n0,9\u00b0, 2,7A, max.50mm length<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nspring<\/td>\n0,5 x 4,5 x 12mm<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\ntoothed belt<\/td>\nGT2, 6mm, 1m<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
1<\/td>\nfishing line<\/td>\nSpectra, 0,5mm, woven<\/td>\nebay<\/a><\/td>\n<\/tr>\n
2<\/td>\ntoothed belt<\/td>\nendless, 100 teeth\/200mm<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
1<\/td>\npulley<\/td>\nGT2, 20T, 5mm bore<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
2<\/td>\npulley<\/td>\nGT2, 36T, 5mm bore<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
2<\/td>\npulley<\/td>\nGT2, 36T, 8mm bore<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\nhotend \/ extruder<\/b><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
1<\/td>\nMerlin-Hotend<\/td>\nSet with nozzle, heater cartridge and thermistor<\/td>\nProtoworx<\/a><\/td>\n<\/tr>\n
1<\/td>\npushfit<\/td>\n4mm tube, M6, iD 4,3mm<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
1<\/td>\nextruder drive gear<\/td>\nMK7, id 5mm<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
1<\/td>\ndowel pin<\/td>\nDIN 7, not hardened, d=5mm, l=8mm<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nstepper<\/td>\n1,8\u00b0, 1,7A, max.40mm lang<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nspring<\/td>\n0,8 x 4,7 x 20mm<\/td>\nAliexpress<\/a> oder\u00a0ebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nptfe tube<\/td>\nId=2, ad=4mm<\/td>\nAliexpress<\/a><\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\noption: Pi-Zero<\/b><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
1<\/td>\nstepdown<\/td>\nLM2596<\/td>\nebay<\/a><\/td>\n<\/tr>\n
1<\/td>\nRaspberry<\/td>\nPi Zero-W<\/td>\nPimoroni<\/a><\/td>\n<\/tr>\n
1<\/td>\nmicro SD-Card<\/td>\n16GB, Class 10<\/td>\nAmazon<\/a><\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\noption: UPS<\/b><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\nOption: magnetic heatbed<\/strong><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
1<\/td>\n\u00a0magnetic foil<\/td>\n\u00a0110x110mm, Schallenkammer Graviflex 200<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n
\u00a01 or X<\/td>\nspring steel<\/td>\n100x100x0,5mm, 1.4310<\/td>\nDIY or contact form<\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note on dowel pins, etc.
\nSometimes on ebay and Co small parts like the cylindrical pins are very expensive if you include the shipping costs. When purchasing the screws, it is usually worth purchasing the cylindrical pins from the screw dealer of your choice. A good address is e.g. Schraubenluchs.de<\/p>\n

A complete list of screws in Excel format can also be found on Github.<\/p>\n

\n

Downloads<\/h3>\n

Here you can download a preconfigured Repetier firmware.<\/p>\n

CLICK ME – Github<\/a><\/p>\n

Version of the Repetier-Firmware is 1.0.1<\/p>\n

The firmware also contains a modified uimenu.h, more information here<\/a>.<\/p>\n

The firmware must be compiled with a current Arduino IDE<\/a> and loaded onto the board. Possibly you have to install an additional FTDI driver<\/a>, because the MKS to board is equipped with an FT232 USB to UART communication chip.<\/p>\n

If you want to update to a possibly more current version, you can upload the config.h from the preconfigured firmware into the Repetier-Online-Configurator<\/a>.
\nThe settings are copied and transferred to the new version. Of course you can also make changes before downloading the new version.\u00a0Please note that the changes to the uimenu.h are not taken over by the Repetier Configurator. If you download the complete firmware, this file has to be exchanged or the modification<\/a> has to be done again!<\/p>\n

Whether the modified uimenu.h can be used in future versions is questionable.<\/p>\n

\n

Download – stl\/dxf<\/h3>\n

Here you can download all necessary stl’s for the print parts and all dxf’s for the lasercut parts.<\/p>\n

CLICK ME – Github<\/a><\/p>\n

\n

Contact form for printed or lasercut parts<\/h3>\n