{"id":2041,"date":"2018-05-31T12:19:45","date_gmt":"2018-05-31T10:19:45","guid":{"rendered":"http:\/\/scheuten.me\/?page_id=2041"},"modified":"2018-05-31T23:31:56","modified_gmt":"2018-05-31T21:31:56","slug":"tr-belt-drive-cover-en","status":"publish","type":"page","link":"https:\/\/scheuten.me\/?page_id=2041","title":{"rendered":"TR – Belt drive cover – EN"},"content":{"rendered":"

Tantillus Reborn<\/h1>\n

Chapter 11 – Belt drive cover<\/h2>\n

\u00a0\"\"<\/h2>\n

The right and rear slightly protruding belt drives of the XY axes can be fitted with covers.<\/p>\n

\"\"<\/p>\n

The covers are not a must, here everyone can decide after personal taste which he likes better. They each consist of a printed part and a lasered part.<\/p>\n

The covers are fastened with only one screw each.<\/p>\n

For the rear cover, a nut holder must be screwed into the housing of the TR from the inside.<\/p>\n

\"\"<\/p>\n

The nut for the side cover is located in a bearing holder on the XY axis. Do not forget these during installation.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

\"\"<\/p>\n

\n